Ckfl /9 UPRIGHT FREEZER 01 EV130FXK - Use and Care Guide Model and Serial Number Plate Copy Your Model Number and Serial Number Here When you need service, or call with a question, have this information ready. 1. Complete Model and Serial Numbers(see location of plate on front page]. 2. Purchase date from sales slip. Copy this information in these spaces. Keep this book, your warranty and sales slip together in a handy place.
Before you plug it in Before using your freezer, you are personally responsible for making sure that it... l is installed and leveled on a floor that will hold the weight, and in an area suitable for its size and use. l is connected only to the right kind of outlet, with the right electrical supply and grounding. (Referto your”Electrical Requirements and Grounding Instructions.“) l is used only for jobs expected of home freezers. Install l is not near an oven, sourc radiator or other heat i!.
Setting the Cold Control... Cooling To Start, turn control to the middle of the dial. This setting will maintain zero zone temperatures under normal operating conditions. L Cold Control... . Turn control to higher number for colder temperatures. l Turn to lower number for less cold temperatures, Bottom l l 1 Adjusting l Freezer First... Allow freezer to cool 6 to 8 hours before filling with frozen food. Let it cool overnight before adding large amoulits of unfrozen food.
Cleaning your freezer This freezer should be cleaned when frost has built up to about ‘14 inch (6 mm) thickness. Complete defrosting and cleaning should be done at least once a year. In high humidity areas, a freezer may need more frequent defrosting. To 1. 2. 3. clean: Turn Cold Control to OFF. Unplug power cord. Place a shallow pan on floor under drain in bottom of freezer. 4. Take out all food and removable parts.
Freezing food in your freezer on foe she she When freezer has cooled to a safe storage temperature, it may be loaded with frozen food. When you plan to freeze unfrozen food, see the following chart for the amount to freeze at one time. A-third longer than distance around 3 to be wrapped. Place wrapping et on flat surface with food in center of et. 2. Brir g front and back of wrapping toge’her and fold in toward food, making at least two one-inch (2.5 cm) folds until food fits ightly against wrapping.
3. Add more unfrozen food after first load is frozen (approximately 18 to 24 hours). 4. After all food is frozen, return Cold Control to the usual setting. Storing frozen Vacc~gtion and moving care food... After food is frozen, stack packages anywhere in the freezer. Packages should not extend beyond the shelf edge or they may keep the door from closing and sealing properly. frlvetStore heavy and bulky packages here. Trivet should be in place at all times for proper air circulation. Vacations...
If you need service or assistance, we su gest you follow these fours 7eps: 1. Before calling for assistance.. . Performance problems often result from little things you can find and fix yourself without tools of any kind. If compressor seems to run too long: l Check tl) see that condenser, located on back of freeze r, is free of dust and lint.
4. If YOU have a problem* ... Call our COOL-LINE service assistance telephone number (see Step 2) and talk with one of our Consultants, or if you prefer, write to: Mr. Guy Turner, Vice President Whirlpool Corporation Administrative Center 2000 US-33 North Benton Harbor, MI 49022 If yc:u must call or write, please provide: model nutrner, serial number, date of purchase, and a complete description of the problem. This information is needed in order to better resporld to your request for assistance.
