Specifications

Removing freezer shelves.. .
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order
Lltt the Front
Then the Back
Removing freezer bin.. .
For proper air movement, keep the freezer bin In
place when the refrigerator is operating.
,
To remove the bln:
To replace the bln:
l Slide out to the stop.
l Place bin on the slrdes.
l Lift the front to clear the stop.
l Make sure the stops clear
l Slide out the rest of the way.
the front of the slides.
l Slide bin in.
Changing the light bulbs.. .
WARNING: Before removing a light shield for
cleaning or for replacing the bulb,
either unplug refrigerator or discon-
nect electricity leading to refrig-
erator at the main power supply.
Shock and injury can occur if elec-
tricitv remains connected.
light bulbs behind refrigerator and freezer con-
trol consoles:
1 Pull control knob straight off.
2 Pull bottom of control panel straight out
3 Loft top of panel off supports.
4 Replace wrth a 40.wati appliance bulb
5 Replace panel in reverse order
Removing the base grille...
2. Pull grille outwards as shown
3. Do not remove Tech sheet fastened behind grille.
light bulb behind crisper:
1. Remove crisperand crisper cover.
2. Bulb IS on back wall of refrigerator.
3. Replace with a 40-watf appliance bulb
4 Replace crisper and crisper cover.
5. Plug in the refrigerator
To replace:
Support Tabs
1 Line up grille support tabs with metal clips.
2 Push firmly to snap into place.
3. Close the doors
Ice cube trays.. .
If cubes are not used, they may shrink The moving
cold air starts a slow evaporatron The longer cubes
are stored, the smaller they get
To remove ice:
1 Hold tray at both ends.
2 Slightly twist.
7