Quick Start Guide

5019 307 00895
GB
Eclips A
Quick Reference Guide
Before using the machine, please also read the instructions for use carefully!
(Subject to technical modifications)
Whirlpool is a registered trademark of Whirlpool USA
4
Programme selector knob
The drying programme is selected by turning
this knob.
“Start (Pauze)” button
The drying programme is started by pressing
this button. The indicator lamp flashes during
the selection phase and lights up during
drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter
and/or heat exchanger need cleaning.
Clean the filter at the end of every cycle.
Overdry protection
The indicator lamp lights up when a humidity
controlled program is selected, to indicate
the working protection function. Function is
not active in time controlled programmes
10’, 20’, 30’, 40’, 60’, 90’ and “ ”.
Programme sequence
Overdry
protection
Drying
Anti-
crease
End
of cycle
Options
Gentle
Reduces drying intensity (recommended
for delicate items).
Buzzer
Signals/sounds end of drying cycle.
Delayed Start
Delays the start of the drying cycle by 3 to 9
hours.
Press the start delay button and selection
appears on the programme sequence. Then
press the “” button to
confirm the final selection and to start the
dryer. During start delay phase, the time
selected led is blinking. During countdown,
the remaining time is indicated. To cancel the
previously set time delay, set the the
programme selection knob to “O” “Off” or
press the start delay button to make the 3
lights off.
+