User guide

WASHSYSTEM
KnowyourFully Automatic
2
Top
LidAssembly
TubRing
BalanceRing
Basket
UserInterface
Cabinet
Underbase
Foot
Top
LidAssembly
TubRing
BalanceRing
Basket
UserInterface
Cabinet
Underbase
Foot
3
Installing Electrical Connections
Caution:
Installing the Machine:
Ensure the earth connection in your electrical supply is proper before connecting the power cord. The
socket should be standard and independent of pin type of 20V AC, 0Hz.A connection with separate line
fuse or circuit breaker of the value of 6A.
• Do not use extension junction box since it may not be properly earthed.
• The appliance must be earthed. The producer declines any responsibility
for damage caused by failure to observe this rule. You are therefore
advised to check that your household supply has an efficient earth.
• Do not place on slanting, uneven, unstable surfaces.
• Place on a solid leveled surface to avoid excessive vibration during
operation.
• Keep the machine at least 10cm away from the wall on all sides.
• Place the drain hose flat on the floor before operating the machine.
• Carpet must not obstruct the opening in the base.
• Washing machine should be connected always to socket.
• If the supply cord is damaged it must be replaced by the manufacturer, its service or similarly qualified
persons in order to avoid a hazard.
• Discard the cushion balance ring assy cover.
2 6
• Ensure the assembly of rat mesh at the time of installation.
• Installation shall be done only by authorized service engineer.
• Parts removed during installation shall be properly disposed like screws, inlet valve plug.
Note:
InstallingyourFully
AutomaticWashingMachine
WARNING
•
•
Use two or more people to move
an d ins tall t h e Wa shi n g
machine.
Failure to do so can injure back
or other body parts.
PersonalInjuryHazard
WARNING
ElectricalShockHazard
•
•
•
•
Do not remove ground point.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.