Specifications

9
2.9 REPLACING THE BATTERY IN THE REMOTE CONTROL
When the remote control batteries begin to fail, the distance at which the
receiver responds to signals from the remote control becomes increasingly
smaller. The remote control will indicate on the screen that the batteries are
almost empty. To replace the batteries, remove the cover on the front of the
remote control by using a coin to loosen the screw on the cap (turning anti-
clockwise). After replacing the batteries, retighten the screw on the cover
(fi gure 13). Do this with care and do not damage the sealing ring. Suitable
batteries (AAA type) for the remote control are the following: Alkaline 1.5
V; Duracell AAA, or similar brands.
2.10 REPLACING A HALOGEN LAMP
(if the underwater lighting is fi tted)
In case your bath is provided with Quaryl Unique lighting (fi gure 14a +
14b) you can disassemble it, with the key supplied.
Before replacing a halogen lamp
switch off the power to the system
by means of the cut-off switch.
To replace a halogen bulb, the
following procedure should be
followed.
1. Remove ring 1 by turning it to
the left.
2. Remove the fl ange and glass.
3. Change the lamp. Take care:
never touch the halogen bulb
with the bare fi ngers.
4. Repeat the above actions (1, 2)
in reverse order.
Note: Spotlights have a
20 Watt, 12 Volt lamps. These
lamps are available from your
electrician and at specialised
lighting shops.
2.11 QUARYL
®
Quaryl
®
baths easily withstand
all normal non-abrasive cleaning
detergents used in the household
without the surface of the Quaryl
®
bath being affected.
2.12 MOVING
If you move house, please pass on this document to the new owners of
the system bath. We will be pleased to send you our latest literature under
these circumstances.
13
14a
14b