Quick Start Guide

ManualsBrandsWhirlpool ManualsDomesticARC 6708 IX

PRODUCT SHEET

A. Refrigerator Compartment

Fan with lamp and antibacterial filter

Grids

Crisper

3a.

Crisper drawer divider

Rating plate

Separator

Removable shelf with a bottle holder

Door trays

B. Freezer Compartment

Upper basket (freezing zone)

Ice tray

10.

Storage basket for frozen food items

11.

The freezer door trays for pizza or other frozen products

with a short storage time

C. Control panel and LCD display

Note:

The fan

helps achieve a better temperature distribution

inside the refrigerator compartment, and optimizes food

storage conditions. The fan is turned on and off

automatically by an electronic system

Important:

The fan ONLY runs if the compressor is working. DO

NOT obstruct the air intake area with food items.

- Ambient temperatures, frequency of door opening and the

position of the appliance can affect the appliance's internal

temperatures.

The number of shelves

and design of accessories may

vary, depending on model. All shelves and door trays are

removable.

- The appliance

accessories

are not suitable for washing in a

dishwasher.

The

anti-bacterial

filter ensures a higher level of hygiene in

your refrigerator through continuous purifying of circulating

air from bacteria. Remove it from the box found in the crisper

drawer (item 3) and insert into the grille (item 1).

Replace the filter every 6 months.

Remove the filter together with the grille and dispose as a

whole.

Replace the filter and the grille with the new ones.

The replacement procedure is attached with the filter.

Our After-sales Service can supply this type of filter.

CONTROL PANEL DESCRIPTION

Compartments ON / OFF, menu, selection and

confirmation buttons

Refrigerator compartment Stand-by - ON/OFF button

Menu button

Appliance ON/OFF button

Selected compartment temperature increase button

Confirmation button

Selected compartment temperature decrease button.

Functions and settings symbols

Functions and settings for the refrigerator compartment

Appliance, alarm and malfunction symbols

Functions and settings for the freezer compartment.

Switching on the appliance:

Press the On-Off button

Switching off the appliance:

Press the On-Off button again

Adjusting the temperature:

To change the temperature

inside the refrigerator or freezer compartment, press the

Menu button until the refrigerator or freezer temperature

symbol turns on (symbol flashes).

Then adjust the temperature by pressing the +/- buttons and

confirm by pressing “OK”.

Displaying the refrigerator and freezer compartment

temperatures.

The temperature inside the refrigerator compartment can be

adjusted between +2°C and + 8°C. In the same way, the

freezer compartment temperature can be adjusted between

-18°C and -24°C.

Summary of content (4 pages)

PAGE 1
PRODUCT SHEET . GB The anti-bacterial filter ensures a higher level of hygiene in your refrigerator through continuous purifying of circulating air from bacteria. Remove it from the box found in the crisper drawer (item 3) and insert into the grille (item 1). Replace the filter every 6 months. 1. Remove the filter together with the grille and dispose as a whole. 2. Replace the filter and the grille with the new ones. 3. The replacement procedure is attached with the filter.
PAGE 2
GB ELECTRICAL CONNECTION GUIDE TO SELECTING FUNCTIONS When the appliance is connected to the power supply, the display lights up and all the symbols appear on the display for a few seconds. The factory setting -18°C appears and flashes, the symbol lits, while the refrigerator display shows a temperature of +5°C (factory-set).While the appliance is working to reach the factory-set temperature, the alarm icon lits , an acoustic alarm sounds and temperature symbol on the freezer display flashes (- -).
PAGE 3
GB Functions and settings for the freezer compartment Freezer compartment temperature setting Fast freezing This function must be activated before freezing fresh food. To select the function, keep pressing the menu button until the display shows the fast freeze symbol. Press OK to confirm. The function is automatically disabled after 24 hours, or can be manually disabled by repeating the same procedure.
PAGE 4
GB Changing the position of shelves: Your refrigerator allows you to change the position of shelves according to your needs. • To remove the shelf, pull it forward to the stop. • Keep the lock pressed down as shown in the picture detail, and pull the shelf frontward until it is released. The locks can be pressed separately. • Pull the pins outward to remove the rails. • Remove the rails as in the picture and place them where you wish. • To place the rails observe the inscription “ ” written on the rail.