Installation Instructions

- 3 -
150cm.
 The lock is locked.
surface of the LF antenna
within 230cm~260 cm, and
press the power button
again.
2. After counting 2 seconds, press
Power Button to perform locking
action.
3. The system performs lock, and
the buzzer sounds for 500ms.
4.Red LED light up for 2 seconds.
5. Extinguish the blue LED.
8
HOST
Identificaton
fail(Antenna)
 Power input 12V±0.1V
 Place the smart key within
the surface of the LF antenna
150cm.
 Identification first, after the
system is unlocked.
Place the smart key outside
the surface of the LF
antenna 300cm.
1. Identification after every 3
seconds of counting.
2.Identification failed, system
execution lock
3. The buzzer sounds for 500ms.
4. Red LED light up for 2 seconds.
5. Extinguish the blue LED.
□OK □NG
9
HOST
Lock(Antenna)
 Power input 12V±0.1V
Change IGN OFF/IGN OF2
Switch to IGN ON.
1.System execution lock.
2.The blue LED will slowly light
up.
□OK □NG
10
HOST
Lock
 Power input 12V±0.1V
 Place the smart key surface
of the LF antenna
within150cm~300 cm.
If the turntable is pressed,
touch the positioning signal
Pull Low.
The system cannot perform
locking.
□OK □NG
11
HOST
Lock
 Power input 12V±0.1V
 Place the smart key within
the surface of the LF antenna
150cm.
1.Power Bottom pressed
300ms
2. Positioning signal Pull
Low.
1.Red LED ON/OFF
(500ms/500ms)，continued 10
seconds.
2.Buzzer sound ON/OFF
(500ms/500ms)，continued 10
seconds.
□OK □NG