Product Manual

Page 4
MR11's can be adjusted up to 7.5 to either side.°
Remove dome
MR-11 Halogen / Angle Adjustment
The MR11 mounting brackets angle is adjustable
An alley light is shown here.
MR11 / Removal & Installation / Alley Light
CAUTION! Replacing any halogen bulb requires the use of safety glasses to prevent injury.
! Do not handle the bulb with bare hands. Use gloves to prevent possible injury.CAUTION
T-10
Torx
Head
Remove
dome
screws
(QTY 4)
Remove screws
and pull housing
part way out.
3
1
2
Pry housing slightly apart
to remove bulb
4
5
Replace Bulb
HALOGEN
WHITE .
GREEN
RED
BLACK
ORANGE
BLUE
Steady T.D./Worklt
Pass. Alley
Driver Alley
Take-Down
Alley
Flashing Takedown
(+)12V
(+)12V
(+)12V
(-)
(+)12V
Ground
Ground
(-)
Fuse @ 7.5 Amps
Fuse @ 3
Fuse @ 3
Amps
Amps
Neg.
(
-
)B
attery
Neg.
(
-
)B
attery
Fuse @ 7.5 Amps
Justice™ Competitor Series Lightbar
OPTIONS
GREEN
RED
BLACK
Not Used
ScanLock™
Pattern Override
(+)12V
(+)12V
Fuse @
Fuse @ 1
1 Amp
Amp
BRAKE-TAIL
WHITE
GREEN
RED
BLACK
Tail
PS Brake
DS Brake
(-)
(+)12V
(+)12V
(+)12V
Ground
Fuse @ 1 Amp
Fuse @ 1 Amp
Fuse @ 1 Amp
Neg.
(
-
)B
attery
LED's
RED
BLACK
RED/WHT
Front LED's
Front LED's
Rear LED's
BLK/WHT
(+)12V
Ground (-)
(+)12V
Ground (-)Rear LED's
Fuse @ 10 Amps
Neg.
(
-
)B
attery
Fuse @ 10 Amps
Neg.
(
-
)B
attery
BLACK: Pattern Override
Applying +12 volts to the BLACK wire while lightheads are activated will change the
flash pattern to whatever “pattern override” is programmed for. To program the flash
pattern activate the lightbar. Activate pattern override by applying +12 volts to the
BLACK wire then select a flash pattern using the Scan-Lock™ procedure.
IMPORTANT! Before returning this vehicle to active service, visually confirm
the proper operation of this product, as well as all vehicle components/
equipment.
IMPORTANT! It is the responsibility of the installation technician to make sure
that the installation and operation of this product will not interfere with or
compromise the operation or efficiency of any vehicle equipment!
Available Flash Patterns:
1. ActionScan™
2. SignalAlert™ Alt.
3. SignalAlert™ Alt./ASync
4. SignalAlert™Sim.
5. SignalAlert™ Alt./Sim.
6. CometFlash® Alt.
7. CometFlash® Alt./ASync
8. CometFlash® Sim.
9. CometFlash® Alt./Sim.
10. DoubleFlash 75 Alt.
11. DoubleFlash 75 Alt./ASync
12. DoubleFlash 75 Sim.
13. DoubleFlash 75 Alt./Sim.
14. SingleFlash 75* Alt.
15. SingleFlash 75* Alt./ASync
16. SingleFlash 75* Sim.
17. SingleFlash 75* Alt.Sim.
18. LongBurst™ Alt.
19. LongBurst™ Alt./ASync.
20. LongBurst™ Sim.
21. LongBurst™ Alt./Sim.
22. SingleFlash 60* Alt.
23. SingleFlash 60* Alt./ASync.
24. SingleFlash 60* Sim.
25. SingleFlash 60* Alt./Sim.
26. SingleFlash 90* Alt.
27. SingleFlash 90* Alt./Sync.
28. SingleFlash 90* Sim.
29. SingleFlash 90* Alt./Sim.
30. SingleFlash 120* Alt.
31. SingleFlash 120* Alt./Sync.
32. SingleFlash 120* Sim.
33. SingleFlash 120* Alt./Sim.
34. SingleFlash 300 Alt.
35. SingleFlash 300 Alt./Sync.
36. SingleFlash 300 Sim.
37. SingleFlash 300 Alt./Sim.
38. MicroBurst™ Alt.
39. MicroBurst™ Alt./ASync.
40. MicroBurst™ Sim.
41. MicroBurst™ Alt./Sim.
42. ActionFlash™ Alt.
43. ActionFlash™ Alt./ASync.
44. ActionFlash™ Sim.
45. PingPong Alt.
46. PingPong Alt./ASync.
47. FlimFlam Alt.
48. FlimFlam Alt./ASync.
49. ModuFlash™ Alt.
50. ModuFlash™ Alt./ASync.
51. ModuFlash™ Sim.
52. ZigZag.
Alt.= Alternating Sim. = Simultaneous Alt./Sim. = Alternating/Simultaneous
Alt./ASync. = Alternating/ASynchroneous
* = California Title IIIX Compliant