Product Manual

Page 2
5
2
341
5
2
341
3.20
7.45
VOLTAGE
1=12VDC
LED / LENS COLOR
1=
5=
A=
R=
AMBER-CLEAR
RED-CLEAR
AMBER-AMBER
RED-RED
LIGHTHEAD / GROMMET MOUNT / WARNING / 5G SERIES
ASSY / LED WARNING - AMBER-CLEAR
ASSY LED WARNING - RED-CLEAR/
ASSY LED WARNING - AMBER-AMBER/
ASSY LED WARNING - RED-RED/
GROMMET
01-0664112-_1
01-0264081-11
01-0264081-51
01-0264081-A1
01-0264081-R1
21-0064188-00
ITEM PART NUMBER DESCRIPTION
QTY
A/R
1
2
3
4
5
1
A/R
A/R
A/R
WHITE-VIOLET - Scan-Lock™
GROUND
BLACK
YELLOW or RED - +12 VDC
SPECIFICATIONS
INPUT VOLTAGE
INPUT CURRENT:
PEAK
AVERAGE
DEFAULT PATTERN
Scan-Lock™ VOLTAGE
Scan-Lock™ CURRENT
Fuse Positive Wire @
12.8VDC ±20
0.70AMPS
0.28AMPS
SignalAlert™
12.8VDC ±20 @ 20MA
20MA / MAX
1 AMP
WHITE-VIOLET - Scan-Lock™
GROUND
BLACK
YELLOW or RED - +12 VDC
SPECIFICATIONS
INPUT VOLTAGE
INPUT CURRENT:
PEAK
AVERAGE
DEFAULT PATTERN
Scan-Lock™ VOLTAGE
Scan-Lock™ CURRENT
Fuse Positive Wire
@
12.8VDC ±20
0.70AMPS
0.28AMPS
SignalAlert™
12.8VDC ±20 @ 20MA
20MA / MAX
1 AMP
PATTERN SELECTION PROCEDURE / Scan-Lock™: Locate the WHITE-VIOLET (Scan-Lock™) wire then turn the lighthead on.
TO CYCLE FORWARD THROUGH PATTERNS: Apply +12V to the WHT/VIO wire for less than 1 second and release. Repeat to advance to next pattern.
TO CHOOSE A PATTERN: While cycling through patterns, allow a pattern to run for more than 5 seconds. This will become the default pattern.
TO CYCLE BACKWARDS THROUGH PATTERNS: Apply +12V to the WHT/VIO wire for more than 1 second and release.
TO RESET THE LIGHTHEAD TO THE DEFAULT PATTERN: Turn the lighthead off. While applying +12V to the WHT/VIO wire, turn the lighthead on.
Continue to apply the 12V until the default pattern is active (approximately 3 seconds).
Available Flash Patterns:
SignalAlert™ 75
SignalAlert™ 150
SingleFlash 375
SingleFlash 150
SingleFlash 75
Single Flash 15
DoubleFlash 150
DoubleFlash 75
CometFlash® 75
ActionFlash™
ModuFlash™
ComAlert™
ActionScan™
SignalAlert™ Steady
Steady / Brake
PATTERN SELECTION PROCEDURE / Scan-Lock™: Locate the WHITE-VIOLET (Scan-Lock™) wire then turn the lighthead on.
TO CYCLE FORWARD THROUGH PATTERNS: Apply +12V to the WHT/VIO wire for less than 1 second and release. Repeat to advance to next pattern.
TO CHOOSE A PATTERN: While cycling through patterns, allow a pattern to run for more than 5 seconds. This will become the default pattern.
TO CYCLE BACKWARDS THROUGH PATTERNS: Apply +12V to the WHT/VIO wire for more than 1 second and release.
TO RESET THE LIGHTHEAD TO THE DEFAULT PATTERN: Turn the lighthead off. While applying +12V to the WHT/VIO wire, turn the lighthead on.
Continue to apply the 12V until the default pattern is active (approximately 3 seconds).
Available Flash Patterns:
SignalAlert™ 75
SignalAlert™ 150
SingleFlash 375
SingleFlash 150
SingleFlash 75
Single Flash 15
DoubleFlash 150
DoubleFlash 75
CometFlash® 75
ActionFlash™
ModuFlash™
ComAlert™
ActionScan™
SignalAlert™ Steady
Steady / Brake
3.20
7.45
VOLTAGE
1=12VDC
LED / LENS COLOR
1=
5=
A=
R=
AMBER-CLEAR
RED-CLEAR
AMBER-AMBER
RED-RED
LIGHTHEAD / GROMMET MOUNT / WARNING / 5G SERIES
ASSY / LED WARNING - AMBER-CLEAR
ASSY LED WARNING - RED-CLEAR/
ASSY LED WARNING - AMBER-AMBER/
ASSY LED WARNING - RED-RED/
GROMMET
01-0664112-_1
01-0264081-11
01-0264081-51
01-0264081-A1
01-0264081-R1
21-0064188-00
ITEM PART NUMBER DESCRIPTION
QTY
A/R
1
2
3
4
5
1
A/R
A/R
A/R