Product Manual

Page 2
SignalAlert™ 75**
SignalAlert™ 150
SignalAlert™ 375
SingleFlash 150
SingleFlash 75
SingleFlash 15
DoubleFlash 150
DoubleFlash 75
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
**
CometFlash®
ActionFlash™
ModuFlash™
ComAlert™
ActionScan™
SignalAlert™ Steady
Steady
default pattern
2G Warning Light Flash Patterns
SignalAlert™ 75**
SignalAlert™ 150
SignalAlert™ 375
SingleFlash 150
SingleFlash 75
SingleFlash 15
DoubleFlash 150
DoubleFlash 75
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
**
CometFlash®
ActionFlash™
ModuFlash™
ComAlert™
ActionScan™
SignalAlert™ Steady
Steady
default pattern
2G Warning Light Flash Patterns
01-0664265-*1
*=LED/Lens Color
A
R
=Amber/Amber
=Red/Red
1
2
=Amber/Clear
=Red/Clear
01-0664265-*2
01-0264256-A1
01-0264256-A2
01-0264256-R1
01-0264256-R2
01-0264256-11
01-0264256-12
01-0264256-51
01-0264256-52
ASSY / LED / WARNING - AMBER (12V)
ASSY / LED / WARNING - AMBER (24V)
ASSY / LED / WARNING - RED (12V)
ASSY / LED / WARNING - RED (24V)
ASSY / LED / WARNING - AMBER w/CLEAR (12V)
ASSY / LED / WARNING - AMBER w/CLEAR (24V)
ASSY / LED / WARNING - RED w/CLEAR (12V)
ASSY / LED / WARNING - RED w/CLEAR (24V)
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
2G GROMMET MOUNT WARNING LIGHT (12V)
2G GROMMET MOUNT WARNING LIGHT (24V)
11
11-416446-000
GROMMET
2
3
4
5
6
7
8
9
ITEM PART NUMBER DESCRIPTION
QTY QTY
1
Scan-Lock™ - The WHT/VIO wire is used for Scan-Lock™ pattern
control. A momentary switch (normally open) should be used to control
this function. Scan-Lock™ operation is as follows:
TO CYCLE THROUGH ALL PATTERNS: Apply the WHT/VIO wire
to +VBAT for less than 1 second and release to cycle forward.
Apply the WHT/VIO wire to +VBAT for more than 1 second and
release to cycle backward.
TO SET A PATTERN AS DEFAULT: When the desired pattern is
displayed, allow it to run for more than 5 seconds. The lighting
system will now display this pattern when active.
TO RESET TO THE FACTORY DEFAULT PATTERN: With the
flasher off, apply the WHT/VIO wire to +VBAT and turn power back
on. When the default pattern is displayed, remove the WHT/VIO
wire from voltage and allow the pattern to run for at least 5 seconds.
Scan-Lock™ - The WHT/VIO wire is used for Scan-Lock™ pattern
control. A momentary switch (normally open) should be used to control
this function. Scan-Lock™ operation is as follows:
TO CYCLE THROUGH ALL PATTERNS: Apply the WHT/VIO wire
to +VBAT for less than 1 second and release to cycle forward.
Apply the WHT/VIO wire to +VBAT for more than 1 second and
release to cycle backward.
TO SET A PATTERN AS DEFAULT: When the desired pattern is
displayed, allow it to run for more than 5 seconds. The lighting
system will now display this pattern when active.
TO RESET TO THE FACTORY DEFAULT PATTERN: With the
flasher off, apply the WHT/VIO wire to +VBAT and turn power back
on. When the default pattern is displayed, remove the WHT/VIO
wire from voltage and allow the pattern to run for at least 5 seconds.
01-0664265-*1
*=LED/Lens Color
A
R
=Amber/Amber
=Red/Red
1
2
=Amber/Clear
=Red/Clear
01-0664265-*2
01-0264256-A1
01-0264256-A2
01-0264256-R1
01-0264256-R2
01-0264256-11
01-0264256-12
01-0264256-51
01-0264256-52
ASSY / LED / WARNING - AMBER (12V)
ASSY / LED / WARNING - AMBER (24V)
ASSY / LED / WARNING - RED (12V)
ASSY / LED / WARNING - RED (24V)
ASSY / LED / WARNING - AMBER w/CLEAR (12V)
ASSY / LED / WARNING - AMBER w/CLEAR (24V)
ASSY / LED / WARNING - RED w/CLEAR (12V)
ASSY / LED / WARNING - RED w/CLEAR (24V)
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
2G GROMMET MOUNT WARNING LIGHT (12V)
2G GROMMET MOUNT WARNING LIGHT (24V)
11
11-416446-000
GROMMET
2
3
4
5
6
7
8
9
ITEM PART NUMBER DESCRIPTION
QTY QTY
1