Owner`s manual

Apollo Owner’s Manual (Part Code: Z40977-00 Rev A) Page 7 of 11
4.
CONTROL FUNCTIONS DESCRIPTION
3. CONTROL
PADDLE RIGHT
2. CONTROL
PADDLE LEFT
1. IGNITION
4. SPEED
SELECTOR DIAL
6. BATTERY
GAUGE
5. POWER LED
7. HORN
8. LIGHTS
9. LIGHT
INDICATOR
Please refer to the diagram above.
1. Ignition. Turn the key supplied in the
ignition to switch on the scooter.
2. Paddle Control Left. Push the left
paddle control to go in a reverse
direction, and release the paddle control
to stop.
3. Paddle Control Right. Push the right
paddle control to go in a forward
direction, and release the paddle control
to stop.
4. Speed Selector. Turn this dial to
determine to speed range of the scooter.
Turn the dial anti-clockwise to go slower
and clockwise to go faster.
5. Power LED. When this LED is
illuminated constantly it means the
scooter is on and ready to use.
6. Battery Gauge. The battery gauge
indicates how much power there is left in
the battery when the scooter is in
operation and moving. When the needle
is constantly in the red, recharge the
batteries (see the battery charging
section)
7. Horn. Press the horn button to sound the
horn when the scooter is switched on.
8. Lights button. Press the light button to
switch the lights on and press again to
switch the lights off.
9. Lights indicator. When this LED is lit is
means the lights are switched on.