Instruction manual

P82030 K
Sheet 7 of 17
Figure 6.
Multiple Lines
Zone, Group and All Call Paging
Figure 6 depicts a multi zone system with group page and "All Call". The system consists of multiple CO/Centrex or analog
extension lines. Each zone line has its own TPI-100 and page devices. An additional line and TPI-100 is assigned to each page
group, and to "All Call". The paging devices connected to the TPI-100's can be any of the configurations shown in Figures 1
thru 4. The TPI-100's controlling the individual zones should have their Timer Control Jumper programmed as described
previously, in Figures 1 thru 4. The TPI-100's controlling group page or "All Call" should have their Timer Control Jumper
placed in the "VOX" position. Note that single or multiple music sources may be used, because each TPI-100 has its own music
input.