Technical data

Chapter 6: Operational Procedures

6.4 Verifying Messages

NOTE: Verify that DIP switch JP5 is in place. See Figure 3-5 for location.

Message 1

Message 2

Message 3

Message 4

Message 5

Message 6

Message 7

Message 8

Figure 6-1 SP40S User Interface

1. Press the button of the desired DV message. The message will begin playback and the

corresponding DV message LED will blink.

2. Press the blinking button again to deactivate the DV message. The message plays in its

entirety a minimum of three times.

SP40S Multi-Function Facility Communication System Manual, Revision D