Specifications

3.4.1.3 View Menu

Allows you to view or hide the Status Bar at the bottom of the screen. See Figure below.

3.4.1.4 Zone Setup Menu

Opens the Background Music or the Options screen. See Figure below.

3.4.1.5 System Info Menu

The System Info has 3 items in its menu. Each of these items are displayed on the Output Screen. See

Figure below.

NOTE: To erase the Output Screen, click on the Clear output command button.

The “Firmware” item displays the firmware version of the SP4-TZC Zone Controller and detected SP4-

APS splitters on the Output Screen. The firmware version of the SP4-TZC Zone Controller does not have

to match the SP4-APS splitters firmware version. See Figure below.

The “Splitter Serial Numbers” item displays the electronic serial number of detected each SP4-APS

splitter on the Output Screen. See Figure below.

The order of the serial numbers does not matter for paging operation. The order that the SP4-APS splitters

are placed in the circuit, determines the Zone Code.

The “Splitter Status” item displays normal and/or trouble conditions for detected SP4-APS splitters on the

Output Screen. See Figure below. This screen can be used to troubleshoot the SP4-APS splitters, when a

trouble condition cannot be resolved using the LED indicators on the SP4-APS splitter circuit board. See

Table 7 in Section 5.7.