Technical data

Chapter 4: Installation
Series SPB Audio Boosters Manual, Revision A
4-2
4.2 General Installation Instructions
Figures 4-5 and 4-6 show the location of wiring terminals used in the installation of each Series
SPB Audio Booster. Table 4-2 identifies and describes the functions of the different wiring
terminals.
4.2.1 Unpacking and Taking Inventory (new from outline)
Carefully unpack the panel and make sure each item described on the packing slip is present and
undamaged.
1. Check the exterior of the shipping container(s) for any exterior damage, then the interior
of the container(s).
2. Notify both the carrier and Cooper Wheelock immediately on the straight bill of lading
(supplied by the carrier) if any damage is found both verbally and in writing; you may
also request an inspection by the carrier. Such requests must usually be made within a
specified time period from date of shipment. Cooper Wheelock is not responsible for
damage to equipment occurring during shipping, and only furnishes replacement parts
against a written purchase order. It is the customer’s responsibility to file a claim with the
carrier.
3. Follow any instructions Cooper Wheelock and/or the carrier may supply about possible
damage.
4. If no damage is found, compare the contents of the Inventory List against the contents of
the shipping container(s), to ensure receipt of all components.
5. Save all shipping materials (any “bubble wrap” or plastic) for possible future use. Store
in a safe, dry location.