Specifications

Message Capabilities
WheelockproductsmustbeusedwithintheirpublishedspecicationsandmustbePROPERLYspecied,applied,installed,operated,maintained
and operationally tested in accordance with their installation instructions at the time of installation and at least twice a year or more often and
inaccordancewithlocal,stateandfederalcodes,regulationsandlaws.Specication,application,installation,operation,maintenanceand
testingmustbeperformedbyqualiedpersonnelforproperoperationinaccordancewithallofthelatestNationalFireProtectionAssociation
(NFPA),Underwriters’Laboratories(UL),NationalElectricalCode(NEC),OccupationalSafetyandHealthAdministration(OSHA),local,state,
county,province,district,federalandotherapplicablebuildingandrestandards,guidelines,regulations,lawsandcodesincluding,butnot
limitedto,allappendicesandamendmentsandtherequirementsofthelocalauthorityhavingjurisdiction(AHJ).
Model
Number
Order
Code
Description
SP40S 9929
Multi-Function Supervised Paging, Messaging, Background Music delivery and Emergency Voice Evacu-
ation System with 24 VDC battery backup circuitry. Single channel system with 40 watts of supervised
audio power and 2 amps of supervised 24 VDC synchronized strobe power and 8 standard messages.
(batteries not included, 2 required) Red Enclosure
SP40S-B 9935 Same as above but with black enclosure
SP40SE 6138 Same as above but with 220 VAC input
SP40SE-B 6139 Same as above but with 220 VAC input and black enclosure
BAT-1212 7390 12 volt, 12-ampere hour battery
SP40S-PMK 9936 SP40S 8 Message Programmed Message Kit
AM-SP40S-SMK 9937 SP40S After Market 8 Message Standard Message Kit
AM-SP40S-PMK 9938 SP40S After Market 8 Message Programmed Message Kit
AM-SP40S-NBT 9939 SP40S After Market Narrow Band Signal Tone Kit
SP-COA 9908
C.O. Port Adapter for the SP40S - Recommended 24 VDC Power Supply is Wheelock RPS-2406 (Order
Code 3770)
BATC-R 5414 Battery Cabinet, Red
BATC-B 5413 Battery Cabinet, Black
BAT-1224 7391 12 Volt, 24Ampere Battery Cell
Ordering Information
4
Message
and
Priority #
Type of
Message
Voice
Type
Message Script
1
Fire
(do not use
elevators)
Male
Three (3) rounds of code 3 horn (followed by): “May I have your attention please! A re
emergency has been reported in the building. While this is being veried, please leave the
building by the nearest exit. Do not use the elevators.”
2
Fire
(do not use
elevators)
Female
Three (3) rounds of code 3 horn (followed by): “May I have your attention please! A re
emergency has been reported in the building. While this is being veried, please leave the
building by the nearest exit. Do not use the elevators.”
3 Fire Male
Three (3) rounds of code 3 horn (followed by): “May I have your attention please! A re
emergency has been reported in the building. While this is being veried, please leave the
building by the nearest exit.”
4 Emergency Female
Three (3) rounds of code 3 horn (followed by): “May I have your attention please! An emergency
has been reported in the building. While this is being veried, please leave the building by the
nearest exit.”
5 Emergency Male
Three (3) rounds of code 3 horn (followed by): “May I have your attention please! An emergency
has been reported in the building. While this is being veried, please leave the building and report
to the designated assembly area for your group.”
6 Weather Male
Five (5) seconds of 1kHz tone (followed by): “May I have your attention please! The National
Weather Service has issued a severe weather warning for our area.”
7 All Clear Male
Five (5) seconds of 1kHz tone (followed by): “May I have your attention please! The building
emergency has ended. An all clear has been given. Please resume normal activities.”
8 Test Male
Five (5) seconds of 1kHz tone (followed by). “May I have your attention please! This is a test of
the Wheelock evacuation system, repeat, this is only a test.”
• Each message can be selected to have a code 3 pre-alert tone, a 1kHz continuous pre-alert tone, or no pre-alert tone
• Post-tones are also selectable and match the pre-tones for individual messages
• Any of the 8 messages are eld programmable to record your own custom message
• Each message length is 30 seconds
• A 1/8” line level audio input jack is supplied for message recording
• A two step recording procedure is required to ensure and verify that the standard message will be permanently erased
• Factory programmed messages are available for custom messages
• Contact customer service for additional information
• Form is required and can be downloaded from www.wheelockinc.com
Note: For telephone paging, the SP40S can connect directly into the page port of the local phone system. If a page port is inaccessible, the SP-COA
(C.O. Port Adapter for the SP40S) may be used to connect the SP40S to an unused C.O. port or stand-alone telephone.