Specifications

5.6 “Send Configuration” Error Messages

If “Audio Class of wiring” and/or “Number of Splitters” inputs are entered incorrectly one of the

following error messages may appear:

5.6.1 “Audio Class of Wiring Mismatch”

If the incorrect “Audio Class of wiring” is selected the following message will appear:

Check all the SP4-APS splitters and ensure that all the CLASS switches are set the same and match the

“Class of wiring” setting on the SP4 Telzone Programmer main screen.

5.6.2 “Splitters Mismatch”

If the incorrect “Number of Splitters” is entered the following message will appear:

Check to ensure that the number in the “Number of Splitters” box on the SP4 Telzone Programmer

main screen matches the number of SP4-APS splitters connected to the SP4-TZC.

5.6.3 “Audio Class of Wiring and Number of Splitters Mismatch”

All SP4-APS splitters must be set to the same “Class of wiring” (CLASS “A” or “B”). If the incorrect

“Audio Class of wiring” is selected and the incorrect “Number of Splitters” is entered the following

message will appear:

Check all the SP4-APS splitters and ensure that all the CLASS switches are set the same and match the

“Class of wiring” setting on the SP4 Telzone Programmer main screen. Check to ensure that the

number in the “Number of Splitters” box on the SP4 Telzone Programmer main screen matches the

number of SP4-APS splitters connected to the SP4-TZC.