Specifications

39
NOTE: If you want to download and edit the current SP4-TZC configuration, continue on to Step 7.
(This will overwrite the SP4 Telzone Programmer Setup file.) Otherwise, go to Section 3.5 on
Page 25 to create and program new Logical Zone Groups and a Background Music Zone.
Click the “Get Configuration” command button on the main screen.
Click “YES” on the Warning message. The following error message will appear:
Click “YES” on the Error message shown below.
Manually update the “Number of Splitters” box to the correct number of SP4-APS splitters
on the network.
NOTE: If one or more SP4-APS splitters have been added or removed the Individual Zone codes, Fixed
Zone Group codes, Logical Zone Group codes, and the Background Music Zone may change. Use
Appendix A at the end of this manual to update the new zone code location for each zone and zone
group
.
Edit the Logical Zone Groups to reflect the changes made to the system, recorded in
Appendix A.
Edit the Background Music Zone to reflect the changes made to the system, recorded in
Appendix A.
Click the “Send Configuration” command button. Notice that the USB CONFIG LED
indicator changes from BLINKING to solid ON.
Click “OK” on the information message shown below.
NOTE: If desired, go to the File menu ->Save and save the file as the Setup file, or Save as… and save
the file with a desired name.
Shut down the SP4 Telzone Programmer software and remove the USB cable. If the enclosure
cover has not be installed, install it now.
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
STEP 12
STEP 13
STEP 14
STEP 15