Specifications

Chapter 4 Paging Operation

4.1 Making A General Page

The following is the procedure for making a page using the SP4-TZC Zone controller.

Pick up the Telephone and connect to the SP4-TZC Zone Controller.

You will hear – Access Tone.

Audio Output - None

Key the 2 digit zone code for the desired zone or zone group

You will hear – Page Ready Tone

Audio Output – Selected zone or Zone group – Alert Tone if selected using JP1 on the

SP4-TZC. If the Alert Tone is not selected, then no output.

NOTE: If an invalid or unused 2 digit zone code is entered the operator will hear 3 short tones followed by

1 long tone. The long tone indicates that the page system has been reset allowing you to enter

another zone code. There is no audio output when an invalid or unused zone code is entered.

Make the announcement.

Audio Output – Message will be broadcast to the select zone or zone group.

NOTE: When paging, Background Music will be muted in all zones.

At the conclusion of the page, simply hang-up the telephone handset. The Background Music

will automatically be restored.

STEP 1

STEP 2

STEP 3

STEP 4