Specifications

28
Enter the name of the Logical Zone Groups and enter the zone codes for the Individual Zones
and/or Fixed Zone Groups for each Logical Zone Group.
Save the file by opening the File menu and clicking Save. The following screen will appear:
Check the File Name and Save.
In order to configure the SP4-TZC Zone Controller and the SP4-APS splitters with the new
file, click the “Send Configuration” command button. If an error message appears, refer to
Section 5.6 on Page 44 for details and corrective action.
Close the SP4 Telzone Programmer software.
Disconnect the USB cable from the Zone Controller and the host computer.
STEP 12
STEP 13
STEP 14
STEP 15
STEP 16
STEP 17