Specifications

3.4.2 “Get Configuration” Command Button

The “Get Configuration” command button queries the SP4-TZC to obtain the current configuration. If the

SP4-TZC was not previously programmed by the SP4 Telzone Programmer, the “Get Configuration”

command button will query and display the current network configuration on the SP4 Telzone

Programmer main screen. If the SP4-TZC was previously programmed using the SP4 Telzone

Programmer, the “Get Configuration” command button will query and display the previously

downloaded configuration on the SP4 Telzone Programmer main screen.

NOTE: Executing this command will overwrite the current setup on the main screen. Before clicking the

“Get Configuration” command button you may choose to save the current SP4 Telzone

Programmer setup by using File-> Save or File->Save As… command menu options.

3.4.3 “Send Configuration” Command Button

The “Send Configuration” command button is used to send the Logical Zone Groups and Background

Music Zone configuration displayed on the SP4 Telzone Programmer screens to the SP4-TZC. When this

configuration is sent it replaces all settings residing on the SP4-TZC with the new configuration.

3.5 Programming and Editing Logical Zone Groups and

Background Music

The SP4 Telzone Programmer software programs the Logical Zone Groups. In review, a Logical Zone

Group consists of as many as five Individual Zones and/or Fixed Zone Groups. For example, let’s say you

wanted to page the warehouse, the warehouse office and the loading dock using one zone code. This can be

done by programming a Logical Zone Group containing these zones. Programming Logical Zone Groups

can be done using the wizard feature or manually. The manual feature is also used to edit the zone groups.

Let’s look at the wizard feature and then the manual feature.

3.5.1 Programming the Logical Zone Groups and Background Music

Using the Wizard Feature

NOTE: Before creating a new Setup file, always save the current setup file.

The SP4 Telzone Programmer software contains a setup wizard for new Logical Zone Groups and

Background Music file.

Connect the USB port on the SP4-TZC to the USB port on the host computer. Make sure that

the SP40/2, all audio boosters and SP4-APS splitter modules are properly connected and

powered up.

Start the SP4 Telzone Programmer software.

Run the wizard by opening the File menu and clicking the New menu option. The following

screens will open:

STEP 3

STEP 1

STEP 2