Specifications

24
3.4.1.5 System Info Menu
The System Info has 3 items in its menu. Each of these items are displayed on the Output Screen.
NOTE: To erase the Output screen, click on the Clear Output Command button.
The “Firmware” item displays the firmware version of the Zone Controller and each SP4-APS on the
Output Screen. The firmware version of the Zone Controller does not have to match the splitter
firmware version.
The “Splitter Serial Numbers” item displays the electronic serial number of each SP4-APS splitter on
the Output Screen.
The order of the serial numbers does not matter for paging operation. The order that the SP4-APS
splitters are placed in the circuit determines the zone code DTMF address.
The “Splitter Status” item displays the status for each SP4-APS splitter connected to the SP4-TZC.
The following screen shows the output screen containing the splitter status for each SP4-APS splitter.
This screen can be used to troubleshoot the SP4-APS splitters when a trouble conditions cannot be
resolved using the LED indicators on the splitter circuit board. This command will display normal or
trouble conditions for detected SP4-APS splitters. See Table 7 in Section 5.7 on Page 45.
3.4.1.6 Help Menu
Opens the Help screens and the “About the SP4 Telzone Programmer” display.