Specifications

Chapter 3 SP4 Telzone Programmer

Software

3.1 About the SP4 Telzone Programmer Software

The SP4 Telzone Programmer software is used to program the SP4-TZC Logical Zone Groups and the

Background Music (BGM) zones through the USB Port. A maximum of 9 Logical Zone groups can be

programmed using the SP4 Telzone Programmer software. Each can combine up to 5 Individual Zones

and/or Fixed Zone Groups.

Background Music can be programmed for each of the Individual Zones (maximum of 68). The Flash

memory on the SP4-TZC stores the Logical Zone Groups and Background Music configuration. When

programming has been accomplished, the SP4 Telzone Programmer software can be closed and the USB

cable removed. If changes are desired, connect the USB cable from the host computer to the SP4-TZC,

launch the SP4 Telzone Programmer software and make the changes.

The SP4 Telzone Programmer folder containing the files will be located on the hard drive of the computer

in the “Program Files” Folder, in the folder labeled “Wheelock”.

3.2 Installing the SP4 Telzone Programmer Software

The host computer operating system for the SP4 Telzone Programmer software program shall be Microsoft

Windows 2000 Professional with Service Pack 2 or above, or Microsoft Windows XP Professional with

Service Pack 1 and 2.

NOTE: The person installing this software must be an “Administrator” for that computer.

To install the SP4 Telzone Programmer software, proceed as follows:

Make certain that you close all software that is running on the host computer, and that the

USB cable is not connected to the SP4-TZC.

Insert the SP4 Telzone Programmer software CD into the CD-ROM drive.

Go to “My Computer”

and double click the mouse button on the CD-ROM drive.

Double click on Setup.exe.

Follow the instructions on each screen. Complete the installation by pressing the FINISH

button on the final screen.

At the completion of the installation process the SP4 Telzone Programmer Icon

will appear on your

Desktop screen, on your Start menu, and in your Programs list.

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5