Specifications

Test each Individual Zone and each Fixed Zone Group as follows:

• Pick up the telephone and connect to the SP4-TZC Zone Controller.

You will hear – Access Tone.

Audio Output - None

• Key the 2 digit zone code for the desired Individual Zone or Fixed Zone Group.

You will hear – Page Ready Tone

Audio Output – Selected Zone or Zone Group will hear the alert tone if enabled as

described in Section 2.7.1 on Page 17.

NOTE: If an invalid or unused 2 digit zone code is entered the operator will hear 3 short tones. There is no

audio output when an invalid or unused zone code is entered.

• Make the announcement.

Audio Output – Message will be broadcast to the selected Individual Zone or Fixed

Zone Group.

NOTE: When paging, Background Music will be muted on all zones.

• At the conclusion of the page, simply hang-up the telephone handset. The Background

Music will automatically be restored.

Replace the front cover of the SP4-TZC Zone Controller using the 4 screws to hold the cover

in place. See Figure 4 on Page 12 for details.

The SAFEPATH

4 Multi-Function Facility Communications System Paging Function is ready for

operation.

STEP 2

STEP 3