Instruction manual

9-21
Section 9-13 - Remote Microphone Station (RMS-3)
Wheelock, Inc. Part Number: RMS-3R (Red) 107375
The Remote Microphone Station (RMS-3) is designed to used with the Dual-Circuit SAFEPATH
®
Panel. It provides a means of emergency voice announcements from a remote location. Only 1
Remote Microphone Station connection is available on the SAFEPATH
®
Panel. A single RMS-3
can be connected, or an Auxiliary Input Module (AIM-3) can be connected, allowing as many as
three RMS-3 modules to be used.
Additional Information is available on the RMS-3 Installation Instructions P83542.
Specifications:
Power Input Voltage: 20-31 VDC
Audio Output Level: 1.05 VRMS
Output Impedance: 600 Ohms
Input Current: 50 mA
3. Press microphone button
and speak into microphone
1. Turn key to ON position
OPERATING INSTRUCTIONS:
2. Select zones
MANUAL
OFF
ON
SYSTEM STATUS
NORMAL
AUTO
TROUBLE
REMOTE MICROPHONE STATION
STATUS
ZONE
ALL
CALL
ZONE
1 2
4. Set AUTO/MANUAL switch
to MANUAL position for
tone alarm
DISCONNECT
ALARM
ZONE
Figure 9-13
Remote Microphone Station (RMS-3)