Instruction manual

9-1
Chapter 9 - Module Descriptions
Section 9-1 - Introduction
There are twelve modules in the Dual-Circuit SAFEPATH
®
Panel product line.
The twelve modules are:
1. Dual-Circuit Mother Board (DCMB) (Section 9-2 on Page 9-3)
2. Dual-Circuit Control Module (DCDC) (Section 9-3 on Page 9-5)
3. Digital Voice Module (MDX-2) (Section 9-4 on Page 9-7)
Output Channel Module (MDV-OCM)
4. Dual-Circuit Power Supply (DCPS) (Section 9-5 on Page 9-9)
5. Supervised Audio System Amplifier/Signal Circuit Module (SAA-40S) (Section 9-6 on Page
9-10)
6. Supervised Audio System Amplifier/Signal Circuit Module (SAA-80S/SE*) (Section 9-7 on
Page 9-12)
7. Supervised Audio Line Level Module (SALL-15S) (Section 9-8 on Page 9-14)
8. Notification Appliance Circuit Interface Module (NACIM) (Section 9-9 on Page 9-16)
9. Speaker Circuit Splitter (4 way) (SPL) (Section 9-10 on Page 9-17)
10. Auxiliary Input Module (AIM-3) (Section 9-11 on Page 9-18)
11. Redundant Amplifier Module (RAM-1) (Section 9-12 on Page 9-20)
12. Remote Microphone Station (RMS-3) (Section 9-13 on Page 9-21)
* 100 Volt European Installations