Instruction manual

8-1
Chapter 8 Technical Data
Section 8-1- Mechanical
Dimensions (H x W x D) 21 x 16 x 6 in.
Weight 40 lb.
Finish Red
Enclosure Construction Type 0.050” steel
Mounting Indoor surface mount
Wiring Entry Top and bottom knockouts (3/4”, 1”)
Door Lock Standard Wheelock key-lock
PC Boards 1 Mother Board (DCMB)
1 Control Module (DCDC)
1 Power Supply (DCPS)
1 Digital Voice Module (MDX-2)
1 or 2 Amplifier Modules
Section 8-2 - Environmental
Operating Temperature 0 to 49 °C (32 to 120 °F)
Storage Temperature -20 to 70 °C (-4 to 158 °F)
Humidity, Non-condensing
85±5% @ 30±2 °C (86 ± 4 °F)
Section 8-3 - Electrical
Inputs
Input Voltage 120 VAC, 2.50A, 60Hz
220 VAC, 1.1A, 50-60Hz for Export
Battery Current Calculations
The current draw of the Dual-Circuit SAFEPATH
®
Panel is determined by the configuration being
utilized. Section 3-7 on Page 3-23 Battery Care and Battery Backup Calculation will assist you in
developing the current requirements.
Automatic Activation
Dry contact inputs or use of NACIM or other open collector
device to activate from a NAC.