Instruction manual

6-2

! Warnin

• Malfunctioning modules in the panel shall be replaced immediately. Do not

attempt to repair them.

• Malfunctioning modules should be returned to the manufacturer for repair or

replacement.

Section 6-4 - Qualified Personnel

Qualified personnel are those who can evaluate proper equipment functionality and ensure its

proper operation and perform all testing procedures on the SAFEPATH

Panel.

PROVIDE ALTERNATIVE SIGNALING MEANS DURING PERIODIC

TESTING TO ASSURE ADEQUATE PROTECTION OF PEOPLE

AND PROPERTY. FAILURE TO PROVIDE ALTERNATIVE

SIGNALING MAY CAUSE PEOPLE TO NOT BE WARNED OF AN

EMERGENCY CONDITION WHICH COULD RESULT IN PROPERTY

DAMAGE AND SERIOUS INJURY OR DEATH TO YOU AND/OR

OTHERS.

Section 6-5 - Miscellaneous Hardware Testing

In addition to testing required by relevant fire codes, regulations, and laws, the following hardware

functions shall be tested (see Table 6-1).

Table 6-1

Miscellaneous Hardware Tests

TEST/HARDWARE TEST DESCRIPTION

Short circuit detection/Contact inputs Activate (short circuit) each contact input, and

verify that proper tone sounds.

Proper operation/Status Contact Monitor the status contact, while causing the

panel to alternate between trouble and normal

states to verify proper operation.

If the panel fails to perform any of the above tests correctly, replace the malfunctioning modules

and/or panel immediately.