Instruction manual

LIST OF TABLES

Table 3-1 Available Strobe Alarm Current for Temporal Code 3 Signal……………………. 3-6

Table 3-2 DCDC DIP Switch Setting Description……………………………………………… 3-21

Table 3-3 DIP Switch Settings for Available Tone Sounds…………………………………… 3-21

Table 3-4 Standby Current for Dual-Circuit SAFEPATH

Panel…………………………….. 3-25

Table 3-5 Standby and Alarm Current for Dual-Circuit SAFEPATH

Modules…………….. 3-26

Table 3-6 Standby Current for Dual-Circuit SAFEPATH

Amplifier Modules………………. 3-26

Table 3-7 Calculations for Amplifier Alarm Current……………………………………………. 3-27

Table 3-8 Average Current Output Measured by Wheelock, Inc…………………………… 3-27

Table 4-1 Alarm Conditions and Results……………………………………………………….. 4-3

Table 6-1 Miscellaneous Hardware Tests………………………………………………………. 6-2

Table 7-1 DCDC Module Trouble Procedure Cross Reference……………………………… 7-3

Table 7-2 MDX-2 Trouble Procedure Cross Reference………………………………………. 7-3

Table 8-1 Outputs…………………………………………………………………………………. 8-2