Instruction manual

P81416 T
Sheet 8 of 10
Figure 16.
The SA-70
and SA-90 are designed to mount flush in a wall or in the ceiling. For ceiling mounting, a speaker support bracket is
available (Wheelock's Model Number SSB-4), see Figure 17. For wall or ceiling mounting, use a 4" square by 1-1/2" deep backbox
with a 4" square 1-1/2" deep extension ring, see Figure 19.
The SA-C8-A
is designed to mount flush in the ceiling. A speaker support bracket, (Wheelock's Model Number SSB-8) and a
backbox (Wheelock's model number CBB-8) are available. See Figure 18.
Figure 17. Figure 18. Figure 19.
WIRING INFORMATION:
Use "D" type station wire (24 AWG) or other suitable wire. Table 4 is a guide for the number of speaker amplifiers per audio pair
run, and Table 5 is a guide for the number of speaker amplifiers per power pair
run.