Instruction manual

FireForce 8 Installation & Operation Manual P/N 52257:B 09/27/2006 9
Electrical Operating Characteristics Introduction
1.3 Electrical Operating Characteristics
Input Voltage 120 VAC @ 3.3 Amps or 240 VAC @ 2 Amps (Jumper selected)50/60 Hz.
Input Control Signal 10VDC to 30VDC, or 12V to 28V Full Wave Rectified, Polarity Reversing.
Output Voltage 24 Volt DC @ 8Amps
NAC outputs 1- 4 3.0 Amps Maximum per output.
NAC outputs 1- 4
With optional Class A adapter
2.5 Amps Maximum per output.
AUX Power 0.15 Amps under all conditions. 2.0 Amps if load is removed during
operation from battery.
Total System Current Total loading on all outputs shall not exceed 8 Amps.