Instruction manual

P83259 H
Sheet 23 of 26
18. OPERATING INSTRUCTIONS:
1. Pick up the telephone handset and press the CO line button (EKSU, KSU), or number assigned to paging (PBX) to access
the port assigned to paging. (Port to which the MZC-144 has been connected).
2. Wait for access tone.
3. To initiate:
A. Zone Page, dial "001" thru "012" to select zones 1 thru 12, respectively.
B. Fixed Zone Group Page, dial "201" thru "204" to select zone groups 1 thru 4, respectively.
C. Logical Zone Group Page, dial “301” thru “325” to select logical zone groups 1 thru 25, respectively.
D. All-Call Page, dial "000".
4. When paging, background music will be muted. At the conclusion of the page (i.e., phone "hangs-up"), the background
music will automatically be restored.
5. When any page is initiated, an alert tone is heard both in the telephone receiver, and in all selected zones. Adjust the tone
volume control in the MZC-144 to the desired level. Note the minimum setting turns the tone off.
6. If Talk-Back is used, adjust the Talk-Back volume control in the MZC-144 to the desired level.
7. At the conclusion of the page, simply hang-up the telephone handset; or press the hook switch before dialing the next
number.
NOTE: All call or paging zone group only operates with audio output being selected on the MZC-144 or MZEM3.
If an MZC-RM is utilized, all call or paging zone groups will not work. This module is for relays only.