Instruction manual

Section 2
Applicable Standards / Documents
NFPA Standards
NFPA 72 National Fire Alarm Code
NFPA 70 National Electrical Code
NFPA 731 Standard for the Installation of Electronic Premises Security Systems
UL Standards (Applies to model numbers ending in “-UL” only)
UL 294 Access Control System Units
UL 1481 Power Supplies for Fire Protective Signaling System
Other
MEA Listed
California State Fire Marshal (CSFM) Listed
Applicable Local and State Building Codes
Requirements of the Local Authority Having Jurisdiction (LAHJ)
Product Use
When installed in accordance with all standards listed in Section 2 of this document, the PS2/3/5
provides power for use with typical 12 or 24VDC devices as used in the access control, fire, or security
industries such as, but not limited to, mag locks, door strikes, door holders, smoke dampers, four
wire smoke detectors, card readers, keypads, etc.
PS2/3/5 Installation Instructions
8/23/2007, 2:51:41 PM
52-133 Rev B.01
Page 5 of 16
AlarmSaf 65A Industrial Way, Wilmington, MA 01887 978 658 6717 www.alarmsaf.com