Specifications

Model SK-2224 Fire Control Panel Installation/Operation Manual
5-2 151051
* Digital Dialer not available at this time.
To Enable
For Entire Panel
(DIP 2)
DIP Position
Serial Accessory Devices
SW5
ON = Serial Annunciator connected to the
control panel.
OFF = No Serial Annunciator connected to the
control panel.
*SW6
ON = Serial Dialer connected to the control
panel
OFF = No Serial Dialer connected to the
control panel.
AC loss report delay SW7
ON = 6 hour delay on AC loss report.
OFF = No delay on AC (for dialer testing only).
Note: If there is not a serial dialer connected
to the control panel this should be set to
the OFF position.
SW8 Not Used.
Table 5-1: System Configuration