Specifications

Model SK-6324 Fire Control Panel Installation/Operation Manual
4-10 151117
3. Place the SK-2866 into the standard 3-gang electrical box. See Figure 4-9.
Figure 4-9 Mounting the SK-2866
4. Place the cover plate over the top of the SK-2866 and align the holes. See Figure 4-9.
5. Insert the four cover plate screws into the four screw holes on the standard 3-gang electri-
cal box.
6. Screw the four cover plate screws into the cover plate until the cover plate fits firmly
against the SK-2866 and the electrical box. Do Not over tighten.
Slide Printed
Annunciator
Label
Cover Plate
Screw
Cover Plate
4” Square
Electrical Box
SK-2866