Instruction Manual

WHEATHEART - GRAIN AUGERS 3. ASSEMBLY

X160-85, X160-105, X160-125

30875 R0 49

3.2.6. ASSEMBLE THE PTO SHIELD ASSEMBLY

1. As shown in Figure 3.12, align the PTO shield front on the PTO shield rear

and secure it with three 5/16” x 3/4” bolts [19538] and 5/16” whiz nuts.

2. Insert the hair pin to lock PTO shield with base.

3. Set the assembled PTO shield assembly aside for use during the installation

of the speed reducer.

Figure 3.12 Assemble the PTO Shield Assembly

Table 3.7 Assemble the PTO Shield Assembly

Diagram # Description Part # Quantity

1 PTO shield rear 20746 1

2 PTO shield front 20745 1

3 5/16” x 3/4” bolts 19538 3

4 5/16” whiznuts 19595 3

5 Lock pin n/a 1

6 Hairpin 19463 1