Owner manual

2. ASSEMBLY WHEATHEART - POWER SWING MANUAL
2.5. HYDRAULIC POWER SWING (OPTION)ELECTRIC AND HYDRAULIC
18 30802 R0
6. Secure the hose by bending the half-clamp retainer clips closed with a
hammer. See Figure 2.11 for clarification.
7. Install Pioneer couplers onto the other end of the long hydraulic hoses.
8. Install hose extensions if required.
Figure 2.11 Hydraulic Hose Routing
Note: To determine whether your hydraulic system is an open system or a closed
system, check your tractor manual.

For a closed system, install the 3/8” NPT Diverter plug that comes with the
control valve. Insert plug into control valve as shown in Figure 2.12.

For an open system, DO NOT install the plug (Figure 2.12).
Figure 2.12 Open to Closed Center Conversion
HYDRAULIC
CONTROL
VALVE ASSY
HALF-CLAMP
RETAINER
CLIPS
HYDRAULIC
MOTOR