User Manual

WHEATHEART - X13 SERIES AUGERS 3. ASSEMBLY
X1374, X1384, X1394 3.16. INSTALL LOW PROFILE INTAKE HOPPER
30787 R1 65
Figure 3.32 Installing the Ball Valve on the Boot
3.16. INSTALL LOW PROFILE INTAKE HOPPER
Table 3.14. provides a list of parts required to install the low profile intake hopper.

1/4” X 3/4” BOLTS
AND 1/4” LOCKNUTS
WARNING
Components are heavy and create a crushing
hazard if improperly handled. Be sure to use
proper hoisting equipment and procedures,
and ensure lifting apparatus is secure.
Lockout the lifting apparatus before working
around or under the raised components.
Failure to do so may cause serious personal
injury.