User Manual

WHEATHEART - X13 SERIES AUGERS 3. ASSEMBLY
X1374, X1384, X1394 3.14. ATTACHING THE AUGER TUBE TO THE FRAME
30787 R1 59
Figure 3.26 Inserting the Lower Frame Attach Pins
Figure 3.27 Stabilizer Braces (Installed)
5. Attach the two stabilizer braces between the Stabilizer brackets and the
stabilizer cross members as follows: use a 5/8" x 2" bolt [19991] and locknut
[19600] and a 5/8" x 2-1/2" bolt [27589] and locknut [19600] to connect the
stabilizer braces to the Stabilizer brackets, and connect the remaining ends of
the stabilizer braces to the stabilizer cross member (one on each side, using
the end flanges at the frame) with two 5/8" x 2" bolts and locknuts.
5/16” X 2-1/2” ROLL PIN
1-3/4” X 19” LOWER FRAME
ATTACH PIN
STABILIZER
BRACKETS
5/8” X 2” BOLT
5/8” LOCKNUT
5/8” X 2” BOLT
5/8” LOCKNUT
5/8” X 2-1/2” BOLT
5/8” LOCKNUT