User Manual

3. ASSEMBLY WHEATHEART - X13 SERIES AUGERS
3.11. ASSEMBLE THE AUGER FRAME X1374, X1384, X1394
54 30787 R1
11. Install the upper scissor:
a. Install the scissor support on the upper scissor using 1/2'' x 1-3/4'' GR8
bolts and 1/2'' locknuts.
b. Lift and position the upper scissor with pin flanges aligned with pin flanges
of the bowtie.
c. Connect the upper scissor to the lower scissors with a greased scissor pin
inserted in each side of the bowtie.
d. Lock the scissor pins in place with 7/16'' x 1-1/4'' bolts and 7/16'' locknuts.
Figure 3.22 Attaching the Scissor Support and the Upper Scissor
1/2” LOCKNUTS
1/2” X 1-3/4” BOLTS
7/16” LOCKNUT
UPPER SCISSOR
SCISSOR PIN
SCISSOR
SUPPORT
7/16” X 1-1/4 BOLT