User Manual

3. ASSEMBLY WHEATHEART - X13 SERIES AUGERS
3.1. GENERAL ASSEMBLY X1374, X1384, X1394
24 30787 R1
See Table 3.1. for a list of assembly procedures.
Table 3.1. X13 Auger Assembly Procedures
Procedure Page
Identify Auger Tube Sections page 25
Assemble the Main Auger Tube page 28
Install the Boot on the Auger tube page 29
Install the Boot Tow Bar page 32
Install the Discharge Spout page 33
Set the Thrust Adjuster page 33
Apply Logo and Model Decals page 34
Auger Tube Truss Assembly page 35
Assemble the Auger Frame page 49
Installing the Hydraulic Cylinders page 56
Assemble Wheel Hubs and Install Tires page 57
Attaching the Auger Tube to the Frame page 58
Connecting Hydraulic Hose to Cylinders page 61
Install Low Profile Intake Hopper page 65
Installing the Hopper Lift Arm and Winch page 69
Install the Hitch Jack page 72
Connecting the PTO Driveline page 72
Auger-to-Tractor Hookup page 74