User Manual

7. MAINTENANCE WHEATHEART - X13 SERIES AUGERS
7.2. FLUIDS AND LUBRICANTS X1374, X1384, X1394
100 30787 R1
7.2. FLUIDS AND LUBRICANTS
GEAR OIL
Use SAE approved 90W or equivalent gear oil.
GREASE
Use SAE multi-purpose high-temperature grease with extreme pressure (EP)
performance or SAE multi-purpose lithium-based grease.
7.3. MAINTENANCE PROCEDURES
7.3.1. VISUAL INSPECTION
Before beginning visual inspection, check auger wheels and ensure that all
operators are aware of safety procedures.
When inspecting, look for possible defects and for the following:
• Be sure all guards are in place, functioning, and not damaged.
• Make sure access, service, and cleanout covers are in place and secure.
• Check that all hardware is in place and secure.
• Inspect hydraulic hoses and fittings for leaks and wear. Fix or replace
where necessary.
• Inspect around the machine for evidence of hydraulic leaks.
• Examine flighting for damage or unusual wear.
• Inspect the truss cables for proper tension and possible damage such as
fraying, kinking, or unwinding.
• Inspect hopper winch cable for fraying, kinking, unwinding, or other possi-
ble damage.
• Examine tires for gashes, uneven wear, or loss of air pressure.
• Be sure all safety decals are in place and legible.
• Check the PTO shield & replace if damaged.