User guide

3. ASSEMBLY WHEATHEART - GHR & WHR GRAIN AUGERS
3.16. PLASTIC MANUAL HOLDER PTO-SD DRIVE MODEL
38 30641 R1
3.16. PLASTIC MANUAL HOLDER
Before beginning installation, ensure that all
winch / auger lift controls are locked in place
and shut down and/or lock out auger.
1. Attach holder to the lower frame arms.
Manual holder must be accessible at all
times, whether frame is up or down.
2. The manual holder cap must face up
(towards the intake end). Attach manual
holder with supplied zip ties. Tighten the zip
ties, securing the holder in place.
Where possible, attach the zip ties above a
frame brace tab to prevent the manual holder
from slipping down the lower frame arms.
LOWER
REACH
ARMS
PLASTIC
ZIP TIES
C
A
P
F
A
C
I
N
G
I
N
T
A
K
E
Figure 3.28
Note: