User guide

3. ASSEMBLY WHEATHEART - GHR & WHR GRAIN AUGERS
3.1. TUBES & FLIGHTING PTO-SD DRIVE MODEL
20 30641 R1
3. Slide tube sections together and secure.
Make sure to align upper and lower track
ends and then tighten bolts. Secure with
hardware in table below.
Track ends must align to allow track shoe to
smoothly slide over track joint. Misalignment
may cause jamming.
FOR 8” AND 10” AUGERS, SLIDE
FLIGHTING TOGETHER.
Figure 3.2
Important:
Details for connections:
Auger For Flighting Amt. For Tubes Amt.
8”
7/16” x 2-1/4” GR 8 bolts and
locknuts
2 7/16” x 1” bolts and locknuts 8
10”
1/2” x 2-3/4” GR 8 bolts and
locknuts
2 7/16” x 1” bolts and locknuts 8
Figure 3.4
Figure 3.3