Owner manual

WHEATHEART - GHR & WHR GRAIN AUGERS 3. ASSEMBLY
GRAIN AUGERS 3.4. INTAKE HITCH
30661 R2 17
3.4. INTAKE HITCH
1. Clean dirt and paint from
lower flight stub and intake
bushing.
2. Attach intake hitch to lower
auger tube and tighten
securely.
3. Maintain 1/2” (1.27 cm)
clearance between bushing
and end of flight.
4. Attach clevis to intake hitch
with clevis pin and gripclip.
Figure 3.4
Figure 3.3
Part Size Amt.
Intake Hitch 7/16” x 1-1/4” bolt and locknut 8
Clevis Pin 3/4” 1
Figure 3.5