Owner's manual

WHEATHEART - SA FLEX AUGER 3. ASSEMBLY
71’ - 111’ 3.18. AUGER-TO-TRACTOR HOOKUP
30651 R5 77
Since the auger and tractor
become an integral unit during
transport, placement, and
operation, the configuration and
measurements between the
tractor drawbar and the tractor
PTO driveline are very
important.
Figure 3.74 illustrates the ideal
measurements. Most tractors fall into this range.
Dimension (B) may range from 8” (20.3 cm) to 10” (25.4 cm) with 9” (22.9
cm) being ideal.
If dimensions (A) and (B) on your tractor are as shown, then dimension
(C), which is critical, will be correct.
If (A) and (B) vary on your tractor from the recommended dimensions,
consult the table for potential problems and their solutions.
Figure 3.74
Figure 3.73