Owner's manual

WHEATHEART - SA FLEX AUGER 3. ASSEMBLY
71’ - 111’ 3.14. PTO (CV) DRIVELINE
30651 R5 57
Figure 3.40
3.14. PTO (CV) DRIVELINE
1. Clean PTO driveline and drive shaft ends of any paint or dirt.
Important: Ensure that a 3/8” x 3-1/2” square key is installed in the drive shaft before
attaching PTO driveline.
2. Slide plain end of PTO driveline onto drive shaft. Make sure that the holes for
the 3/8” roll pin are lined up and square key is in place.