Manual

WHEATHEART - POST POUNDER 3. ASSEMBLY
S2000 MODEL 3.2. ASSEMBLING THE S2000 POST POUNDER
IM15 R1 27
3. Any extra space in the ballast box can be shimmed with light-weight material
to prevent noise caused by uncontrolled movement of the ballast weights
during operation.
4. Replace the ballast box cover and secure it with the two 1/2” x 1-1/2” bolts
(see Figure 3.8).
Figure 3.8 Installing Hammer Ballast Weights
WARNING
Do not overfill ballast box. An overloaded
ballast will cause excessive stress on the
hydraulic system and can damage the
equipment and/or potentially injure operators.
Do not exceed 280 lb maximum total ballast
weight.
PLACE BALLAST INSIDE
BALLAST BOX COVER
1/2” X 1-1/2” BOLTS
BALLAST BOX