Manual

WHEATHEART - POST POUNDER 3. ASSEMBLY
S2000 MODEL 3.2. ASSEMBLING THE S2000 POST POUNDER
IM15 R1 25
3.2.3. CONNECT THE HUGGER ARM AND CYLINDER TO THE MAST
ASSEMBLY
1. The hugger assembly comes with the hugger brackets loosely connected to
the front roller plate for ease of shipping. In order to fit the hugger arm around
the mast assembly, first remove the two bolts that secure the front roller plate
to the hugger bracket that is not connected to the hugger arm.
Figure 3.5 Hugger Arm Assembly, Preparation For Installation
Figure 3.6 Hugger Installed on the Mast Assembly
2. Align the four hugger bracket bolt holes with the bolt holes on the mast
assembly.
FRONT ROLLER PLATE
HUGGER ARM
HUGGER BRACKETS
BOLT HOLES
BOLTS REMOVED
(TO MAST)
MID-CYLINDER BRACKET
FRONT CYLINDER BRACKET
LOCATIONS
HUGGER BOLT
MAST LEVEL