Owner's manual
1. INTRODUCTION WHEATHEART - R SERIES AUGERS
1.1. PRE-DELIVERY CHECKLIST R8-36, R8-41, R8-46, R8-51, R10-36, R10-41, & R10-51
6 30758 R1
1.1. PRE-DELIVERY CHECKLIST
1.1.1. MECHANICAL
• All fasteners tightened.
• Belts present and adjusted to proper tension.
• Upper chain drive adjusted and lubricated.
• Auger rotates freely.
• Tire pressure within manufacturer’s specification.
• Wheel bolt torque within specification.
• Winch brake and locking mechanism tested, lock engages properly, and
brake prevents freewheeling. There should be at least 3 wraps of cable
around winch drum in the fully down position.
• Winch cable checked for damage such as fraying, kinks, or unraveling. Cable
anchor on winch drum must be tight.
• Gearbox oil level checked.
• Engine oil level checked.
• Machine greased.
• Machine cleaned.
1.1.2. SAFETY
• All guards and shields installed, secured, and functional.
• All safety signs installed and legible.
• Reflectors installed and clean.
• Operating and safety instructions reviewed with owner.
• Operator’s Manual supplied to owner.